Before you begin painting you need to prepare everything that you will need. Pulp painting requires a lot of preparation. Once this is done properly good results are guaranteed.
It is the art of using the colored pulp as a medium and applying it on a surface. The pulp can be derived from different qualities of materials such as reeds, grass, cotton or even bamboo.
The choice of the plant fiber is an important step. The fiber is then mixed with water and beaten or blended until the fibers are well mixed to produce a fine mixture. The technique used to mix can produce different texture with one type of fiber.
Bamboo is the most preferred pulp ingredient. It is usually available in most areas, absorbs well and is very easy to control. Once you mix the fiber well, you will then need to color it.
Each pulp tends to absorb color differently. The fibers tend to behave just the same way textiles do. One red pigment when used to color different fibers, it will appear differently. This all depends on the texture of the pulp and how well it was mixed.
One needs to be very keen when mixing the colors. You can get different tones or end up losing the desired color if the coloring is not done properly. Be sure to avoid putting different colored pulps together as the colors can get mixed up.
The purpose of this painting technique is to create a certain illusion using different colors. You can add as many colors as you want. A close view of the painting shows the different fibers and their colors. When the same painting is viewed at a distance, it gives a different perception.
Before you start painting, it is important to have an idea of how you want the painting to be. You can start by drawing a sketch that will guide you. This is particularly helpful since you will be painting from the front moving to the back.
This kind of artwork requires special experience. Unlike regular painting where one starts with painting the background, this one requires you start with the front and work towards painting the background.
You start with painting the foreground and move towards painting the background. The idea behind this is to avoid messing the different layers of pulp you will have created earlier. This allows you to have some control over the outcome of the final painting result.
The pulp should remain wet during the painting period. You will need to carefully apply the different layers of pulp when trying to achieve depth in the painting. You can also use different color tones to achieve this.
Once you are done with the painting, you can strengthen the background with a layer of pulp and a board. Silicon is the best adhesive to use. You can also quicken the drying process by using a vacuum pump to suck most of the water from the piece.
Depending on the painting size, it may take time to dry. Some paintings can even take weeks. After it has dried, you can remove the board in the background to have a paper thin painting as your final result.
It is the art of using the colored pulp as a medium and applying it on a surface. The pulp can be derived from different qualities of materials such as reeds, grass, cotton or even bamboo.
The choice of the plant fiber is an important step. The fiber is then mixed with water and beaten or blended until the fibers are well mixed to produce a fine mixture. The technique used to mix can produce different texture with one type of fiber.
Bamboo is the most preferred pulp ingredient. It is usually available in most areas, absorbs well and is very easy to control. Once you mix the fiber well, you will then need to color it.
Each pulp tends to absorb color differently. The fibers tend to behave just the same way textiles do. One red pigment when used to color different fibers, it will appear differently. This all depends on the texture of the pulp and how well it was mixed.
One needs to be very keen when mixing the colors. You can get different tones or end up losing the desired color if the coloring is not done properly. Be sure to avoid putting different colored pulps together as the colors can get mixed up.
The purpose of this painting technique is to create a certain illusion using different colors. You can add as many colors as you want. A close view of the painting shows the different fibers and their colors. When the same painting is viewed at a distance, it gives a different perception.
Before you start painting, it is important to have an idea of how you want the painting to be. You can start by drawing a sketch that will guide you. This is particularly helpful since you will be painting from the front moving to the back.
This kind of artwork requires special experience. Unlike regular painting where one starts with painting the background, this one requires you start with the front and work towards painting the background.
You start with painting the foreground and move towards painting the background. The idea behind this is to avoid messing the different layers of pulp you will have created earlier. This allows you to have some control over the outcome of the final painting result.
The pulp should remain wet during the painting period. You will need to carefully apply the different layers of pulp when trying to achieve depth in the painting. You can also use different color tones to achieve this.
Once you are done with the painting, you can strengthen the background with a layer of pulp and a board. Silicon is the best adhesive to use. You can also quicken the drying process by using a vacuum pump to suck most of the water from the piece.
Depending on the painting size, it may take time to dry. Some paintings can even take weeks. After it has dried, you can remove the board in the background to have a paper thin painting as your final result.
About the Author:
When you are looking for information about pulp painting, come to our web pages today. More details are available at http://www.moffettfinearts.com/blog now.