At some point, even our favorite books become worn out and torn apart. You do not need to but another as you can solve this problem right at home. You only need to follow a very simple process, and your books will be good as new. The items required are affordable, and some are even in our homes. This is the procedure of book restoration new jersey.
The first step is to align the pages the way they are required to be. This may take a while for the book to go back to its previous form. A professional book restoration store uses a special jig to get the job done which makes it so much easier. At home, you may use a special piece of wood to press down the pages until all of them are aligned.
After doing this, you will require two wood slats. These are used for aligning the book spine into position. The slats are also a big help during drilling. This because you cannot drill directly on the paper. It may cause a lot of spiraling resulting in overly large holes. The wood slats help in reducing the vibration effects of the drill on the paper.
After putting the slats in position, you should hold the volume in place using clamps. Make sure that the size of the clamp is proportional to the size of the book. The smallest thickness the clamp can hold may be a lot bigger than the thickness of the manuscript. Medium size clamps help to make the drilling process a lot easier. This is because the book is held in position.
When drilling, you should be very careful. Make sure that you take care of your fingers. Although the clamp twill is holding the book in place, you may need to hold it when drilling to keep it stable. You should avoid drilling all the way through the second wood slat. This is because you may drill to fast and end up drilling your own fingers which is excruciating.
As you drill through the spine, you may use a hand-held motor or a drill press which would work so much better. You cannot always be sure that you may drill straight. So you should drill a hole and leave some space before you drill another. You can drill the spaces left from the other side of the spine. You may have to move the clamp for this but ensure the papers do not move. Otherwise. There will be no alignment.
When you are done the drilling. It is time to sew. You are not going to use the normal thread but the strong kind. Like the one used for shoes. You should do this as you move the manuscript clamp and the boards carefully. You should take your time in moving the boards and the clamp because even the slightest movement of the paper means all your hard work will have gone to waste.
You might use new fabric on the old new cover because you can be sure it is of the right size. You can use the color of your choice, and it will be your own unique design. You can wrap up by using the gold spray to brighten up the old leaf edges. This gives it that classy new look.
The first step is to align the pages the way they are required to be. This may take a while for the book to go back to its previous form. A professional book restoration store uses a special jig to get the job done which makes it so much easier. At home, you may use a special piece of wood to press down the pages until all of them are aligned.
After doing this, you will require two wood slats. These are used for aligning the book spine into position. The slats are also a big help during drilling. This because you cannot drill directly on the paper. It may cause a lot of spiraling resulting in overly large holes. The wood slats help in reducing the vibration effects of the drill on the paper.
After putting the slats in position, you should hold the volume in place using clamps. Make sure that the size of the clamp is proportional to the size of the book. The smallest thickness the clamp can hold may be a lot bigger than the thickness of the manuscript. Medium size clamps help to make the drilling process a lot easier. This is because the book is held in position.
When drilling, you should be very careful. Make sure that you take care of your fingers. Although the clamp twill is holding the book in place, you may need to hold it when drilling to keep it stable. You should avoid drilling all the way through the second wood slat. This is because you may drill to fast and end up drilling your own fingers which is excruciating.
As you drill through the spine, you may use a hand-held motor or a drill press which would work so much better. You cannot always be sure that you may drill straight. So you should drill a hole and leave some space before you drill another. You can drill the spaces left from the other side of the spine. You may have to move the clamp for this but ensure the papers do not move. Otherwise. There will be no alignment.
When you are done the drilling. It is time to sew. You are not going to use the normal thread but the strong kind. Like the one used for shoes. You should do this as you move the manuscript clamp and the boards carefully. You should take your time in moving the boards and the clamp because even the slightest movement of the paper means all your hard work will have gone to waste.
You might use new fabric on the old new cover because you can be sure it is of the right size. You can use the color of your choice, and it will be your own unique design. You can wrap up by using the gold spray to brighten up the old leaf edges. This gives it that classy new look.
About the Author:
You can find a list of the advantages you get when you use book restoration New Jersey services at http://www.bythecpress.com right now.